The digital audio outputs are available on the connector labeled AES/EBU. Each reproducer has a (-) and a (+) output on this connector. When wiring to a standard RCA coax digital audio cable, the (-) should be wired to the shield and the (+) should be wired to the tip. When playing a video with 2-channel MPEG audio, this output generates a S/PDIF signal. When playing a video with Dolby Digital Audio, the analog outputs of the Binloop are silent and this connector outputs an AC3 signal that must be fed to a Dolby Digital decoder/receiver.
I want to play a video with Dolby 5.1 audio. Where does the Binloop output digital audio?
Have more questions? Submit a request