V16X, V4X, V16Pro, V4Pro, VCore, WinScriptLive
Topics relating to "Pro" line of Show Controllers. Versatile, frame-accurate show controller for serial and network devices. Also topics for WinScriptLive Software used to create scripts for controllers
- How to I enable "Redundant Mode" to allow for a backup controller?
- How to trigger or start a sequence on Weekdays only
- How can I use Modbus TCP with my V16Pro?
- Why are there two UDP ports when I setup a device in WinScriptLive?
- How can I start a sequence from my iPad?
- How to I send information from my V16Pro or V4Pro to a Crestron or AMX controller?
- How can I create a custom product file to send a message?
- Why are my sequence events being delayed?
- Can I use a Touchscreen with my Alcorn McBride Show Controller?
- Where can I find break-out connectors for the DB37 connector on the Show Controller?
- Can I use the Show Controller to receive data from a motion sensor?
- How do I get my show controller to respond to incoming messages?
- Do your show controllers sync to SMPTE and EBU timecode?
- What is the largest distance you can place a contact closure away from a show controller? 24V?
- What size CompactFlash card ships with the V16 Pro?
- Can I convert or use old WinScript scripts (V4+, V16+, .amw files) with the new V16Pro or V4Pro?
- The V16 Pro has USB, can I use it to control another USB device?
- Do each of the ethernet ports on the V16 Pro have their own IP address/MAC address?
- Can I send a UDP message over ethernet to a device without using a Product File?
- What is the difference between the V16 Pro/V4 Pro and other embedded show controllers?
- Is the V16 Pro/V4 Pro a PC?
- Can I use a V16 Pro/V4 Pro in a live show?
- What is the difference between the V4Pro and V16Pro?
- Does the V16 Pro/V4 Pro have a real-time clock?
- Why does the V16 Pro/V4 Pro have 2 Ethernet ports?
- How do I start sequences in the V16X or V4X from my custom PC program, AMX or Crestron controller?
- How can I quickly check if all my List Variables are a certain value?